Draper belts: Side belts 1,016mm (40 in.) | Center belts: 1,776 mm (70 in.)
Clean: Cleats 19.05 mm (0.75 in.)
Specifications
2018
John Deere
645FD
Base
General
Knife: 490 cycles/min (1,040 spm) | Pickup reel: 6-70 rpm | Draper belts: Side belts: variable up to 228 m/min (748 fpm) | Center belts: 211 m/min (692 fpm) | Feed drum: 234 rpm
Pickup reel Diameter: 1,067 mm (42 in.) | Feed drum Diameter: 414 mm (16 in.) | Feed drum fingers Diameter: Heavy-duty round with breakaway notch and retainer 16 mm (0.625 in.) | Finger reach: 152 mm 6 in.
13.72 m (45 ft)
Base Hydraulic, 9 degrees max.
Draper belts: Side belts 1,016mm (40 in.) | Center belts: 1,776 mm (70 in.)
Clean: Cleats 19.05 mm (0.75 in.)
Reel; range 185 mm (7.3 in.) | Total range 185 mm | fore and aft: range 359 mm (14.1 in.) | Total range 499 mm (19.6 in.)
Platform: 12.9 m (42.4 ft)
Overall operating With dividers: 2.74 m (9.0 ft)
field position: 13.3 m (43.7 ft)
pickup reel aprox: 4,264 kg 89,400 lb)
Knife drive: Dual knife base | Pickup reel Number of slats: six bat poly base | Fingers: Nylon | Height control: Hydraulic | Speed control: Hydraulic | Reel resume: Base | Reel reverse: Base | Draper belts Speed control: Hydraulic from cab (side belts only) | Center belt reverse: Base | Number of fingers: 20 | Auger finger platform: Triple chevron, retracting | Drum/auger reverse: Base | Center clean out door: Base | Header height sensing Type: Electro-hydraulic base | Header height sensing on the ground: Base
